Alinking UNC-9512 Manual do Utilizador descarregar pdf (Página 13)

Ceiling Installation Procedure

1. Take the network module base put from

the camera unit pack.

2. Use the screws in Screw Pack A to secure

the module base on the wooden plate.

Note: Do not affix the camera on a ceiling made from fragile material, such as gypsum,

calcium carbonate, magnesia, PU, PVC, and glass. The thickness of the wooden plate should

be at least 1.5 cm. If the camera is to be fixed on a concrete or brick surface, suitable

setscrews should be prepared by the user. For convenience of the installation, the wooden

plate can be removed from the ceiling in advance and assembled back after the network

module is fixed.

3. Pull out the steel wire from the network

module base.

4. Connect the steel wire to the hook on the PTZ

Dome Camera to prevent accidental falling of

the camera.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 88 89

Sem comentários

Alinking UNC-9512 Manual do Utilizador Página 13