Alinking UNC-9512 Manual do Utilizador

UNC-9412/9512 High-Speed Dome Network Camera User Manual Software Version 1.0 1

Hardware Installation Important Safety Precautions 1. Please carefully read the instructions before installation. 2. Keep the manual for future us

The hardware installation instructions below are intended to provide all required knowledge regarding installation of the camera. As for the setting o

Notice for unpacking Take out the lens protection pad for easier removal of the PTZ Dome Camera from the box. Do not put the equipment on a firm s

Ceiling Installation Procedure 1. Take the network module base put from the camera unit pack. 2. Use the screws in Screw Pack A to secure the modul

5. Align the arrow on the PTZ Dome Camera with the screw hole on the network module base. 6. Turn the PTZ Dome Camera to the right until both screw

10. Remove the decorative rim from the accessory pack. Cut the edge as shown if it is necessary to pull out wires inside the rim. 11. Mount the deco

13. Remove the lens protection cover.14. Remove the outer package of the optical cover and align the optical cover with the gap of the PTZ Dome Camer

Inserting Installation Procedure 1. Take the opening sample sheet out from the accessory pack and draw a circle on the material according to the op

5. The adjusting screw determines the height of the PTZ Dome Camera beneath the ceiling. Turn the screw clockwise to extend the camera, or turn the

10. Turn the PTZ Dome Camera to the left until both screw holes are aligned. 9. Align the arrow on the PTZ Dome Camera with the screw hole on the ne

Contents Contents ...2 Package C

14. Mount the decorative rim onto the network module base and notice the position of the outlet hole. 15. Use the screw in Screw Pack D to secure th

17. Plug the network cable. Connect the video terminal if analog video output is required. 18. Connect the power cable and, if required,the alarm inp

20. Remove the outer packaging of the optical cover and align the optical cover with the gap of the PTZ Dome Camera. Put the cover to its position, t

Camera Settings After the hardware has been installed, insert the supplied CD in the computer and execute the file IP FINDER.EX following the steps be

3. Click Submit tovalidate new settings. 5. Confirmation When all changes have been confirmed, click “Exit” to quit. 4. When all changeshave been c

Camera Setting from a Router You can use DHCP when you want to use the camera on the Intranet (LAN). However, the IP must fixed when you want to use

Change the Internet Explorer Setting This product uses ActiveX Control to play images and sound on your PC. The ActiveX Control application software

Install IE Tab. Restart Firefox. IE Tab online learning. 27

Enter the Main Page 1. Open the IE browser and key in the IP address of the product. Key in the IP address of the camera When the login screenappe

Click “Install ActiveX Control”. Setup prompt screen 4. The security warning screen appears. Click "Install". The

Application Setting ...69 Event ...

6. When installation of the ActiveX control is completed, the image transmitted from the camera and the operation interface appear on the screen.

Camera Main Page Descriptions: Source: Information bar 1. Format: resolution of the current video stream 2. FPS: Frame Per Second of the current vid

2. Rotation speed: This function controls the speed of rotation in the Preset, Tour, and AutoPan modes. 7 options are available. “1” is the slowest

3. Optical ZOOM: A build-in 18x or 26x optical lens (depending on the camera model) is used for zooming the image. You can directly drag the small ba

to (64 locations). This function can save the location you want to monitor and the camera will automatically rotate to the saved location when you cli

2. Enter a name for the tour setting. Up to 5 groups of tour settings can be defined. 3. Time (second) to stop at each tour location. 4. Select a pre

12. Alert: Notification of alarm If the camera detects a movement or an alarm, the Alert button will flash to alert the monitoring personnel. Clic

1. 14. Language (interface language selection) This product currently supports 4 languages: English, Simplified Chinese, Traditional Chinese and Japa

17. Streaming: sets the video stream protocol (HTTP is recommended) This product provides three different video streaming protocols: UDP, TCP, and

Video streaming 18. Brightness: Adjusts the brightness of the image/ Contrast: Adjusts the contrast ratio of the image. In the setting window, press

Package Contents Make sure you have received the following items. If any item is missing, please contact your dealer. Camera unit Pack:

directory (C:\video). A red mark appears at the bottom left corner of the image when the recording function is running. Recording button Snapshot bu

3. Switch to the Security tab.4. Select Trusted site 5. Click on Sites. 7. Cancel the selection of this option.8. After the input is completed, cli

22. Enable/Disable microphone: When you click the speaker icon, a "Forbidden" mark will show on the icon and the sound from an external micr

System SettingsSystem setting contains basic and application settings. The basic setting is executed for basic system information, transmission speed

Otherwise, it does not activated. OFF: LED is turned off. Flash: LED flashes according t o the user-defined interval.  Basic Setting > System

1.Enter multimedia data fromthe main screen.2. Select a streaming link 4. Enter the link name. 3. Add a new link. 5. Enter the IP address of the

8. Select “Yes” toconnect.7. Select this stream name to proceed with linking. 10. Loading the image. 9. Connecting.11. Video stream screen .

good choice for the best resolution when video recording is required for collection of evidence. Video resolution streaming  Basic Setting >

Frame rate selection  Basic Setting > Video / Image > Video Image >Frame per Second (FPS): With NTSC, you can choose 1, 2, 3, 4, 5, 6, 7,

fastest. Video quality selectionFix bitrate 15 transmission speeds ranging from 32K to 4M are available in the Fix Bitrate mode. The higher the tran

7. Screw Pack Pack A Pack B Pack C Pack D 8. Inse

Basic Setting > Video Image > OSD You can set to display the date, camera name and other information on the screen.  Basic Setting > Video

Basic Setting > Video / Image > Camera Advance Setting Basic Setting > Video / Image > Camera Advance Setting > Setting Window When

Basic Setting > Video / Image > Camera Advance Setting > White balance The white balance setting can adjust the difference of white color in

Privacy area Masked area Mask color setting Masked area effect The masked area move when the camera change positionBasic Setting > Audio (Sound

 Basic Setting > Audio > Audio > Audio Raw Format You can select No Audio or PCM. When you select No Audio, the sound transmission from the

PPPoE setting v Streaming v UPnP v SMTP v SAMBA v Notification v IP Filter setting v Event Setting v v schedule sett

User setting Add a new user and set up a different iilChange the privilege or password of a user. You cannot Delete a user from the list. Log in the

Root can not delete but can be update Activate the anonymous view and camera rotation functions; define the number of viewers who are allowed for on-

Other settings: For IP address, Subnet mask, Default gateway, DNS 1, and DNS 2, the DHCP server will assign these values automatically when DHCP is in

1. Dial: You can select whether or not to dial when you boot the machine. 2. Use DHCP or fixed IP for connection to the LAN environment. 3. Key in

System Requirements UNC-9412 Network Environment LAN 10/100M Ethernet Monitoring system resource requirements Operating system Windows 2000 Professi

successfully. Basic Setting > Network > DDNS (Dynamic Domain Name Server Setting) The IP address (Ex. 210.168.0.22) is like a telephone number

DDNS setting Basic Setting > Network > UPnP (Universal Plug and Play) If you connect your camera to a router, IP allocator, or wireless AP, you

Website link UPnP setting To activate the UPnP function in Windows OS: Ex: Windows XP: 1. Windows component installation. 4. Click Networking Servic

2. Click Exceptions 1. Click Windows Firewall in the Control Panel 3. Check UPnP Configuration. 3. View the connection device using “My Network Place

 User name: the SMTP server username.  Password: the password of the SMTP server.  Select “SAVE” to save the setting. Basic Setting > Ne

Basic Setting > Network > Notification Of IP Address Change (IP address change notice) This setting is not necessary for a fixed IP. For a dyna

Notification of IP change Basic Setting >\ Network >\ Multicast This function allows multiple people to watch video streaming without limitati

Basic Setting > Date/Time (date/time setting) 日期/時間設定  Basic Setting > Date/Time > Server Time (the date/time of the server)  Basic Setting

Basic Setting > IP FilterThis function filters IP addresses and is able to allow or deny visits from particular addresses/target addresses Ip filt

Application Setting Application Setting > Event (event trigger setting page) This camera is equipped with intelligent security management functions

Introduction This product is a speed dome camera that can connect to Ethernet, LAN, and any broadband networks. Unlike traditional CCTV cameras, a CPU

Options: • General: Name: Name the trigger event here. • Response to event trigger: the time setting of the trigger event Always: Always monitoring

Add Schedule: Add Schedule setting page The Add Event setting page and the Add Schedule setting page are basically the same except that the Add Sch

Application Setting > Event > Trigger (manual test of trigger response) Whenever the camera detects abnormal events during the scheduled time, i

Trigger mail: Sending mail Click “Set” after you enter the email address and subject to test the integrity of the sent mail. Trigger FTP: Sending AV

Add ftp server Name: the name of the FTP Network Address: IP address of the FTP Login: Log-in name Password: Log-in password Upload Path: Uploadin

Login: Log-in name Password: Log-in password Proxy: Proxy server name Proxy Port: Proxy server port Proxy Login: Proxy server log-in name Proxy Passwo

Application Setting > Motion Detection You can open the setting frame by clicking on the area to monitor. To move area to monitor, drag the area w

Application Setting > Firmware upgrade Firmware upgrade Contact your dealer for more information about firmware upgrade. The sales representative

upgrade. 韌體更新中 When the firmware upgrade has been completed, the machine reboots automatically. Reconnect to the server after 60 seconds. Note: The

Application Setting > Factory Default You can use this function to reset to factory default, but all changes, including the IP address, you have ma

System Introduction 1. AC/DC power inlet: This product supports both alternate current (AC24V/1.0A) and direct current (DC12V/2A). Please connect the

Backup: Data backup Back all parameters: Back up all changes you have made. When you click Backup, a file download window appears. Back up the file na

81

Attachment A: External Alarm In addition to the motion detection executed by the internal software application, the product can connect to external in

Warning! The alarm will be triggered when alarm pin 3 & 4 are formed as a short circuit. Please do not connect the electric voltage or current

Attachment B: Bandwidth Estimation Since the FPS is dependent on the bandwidth of the camera, the relationship between the size of an image file and

Attachment C: Troubleshooting and FAQs Question Answer and Solution Function What encoder and decoder are used by the camera for sounds and images? T

Finder, please disable your anti-virus applications or firewall. Internet Explorer does not display the camera screen correctly. Please be sure that

download the file again. Incomplete download or installation of the camera ActiveX control is the major reason for this problem. Check the security se

I can't control the camera to move up, down, right, or left smoothly. Delay might occur when you are accessing a video stream and remotely mov

FCC Class B Announcement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the F

LAN socket Please connect the product to your network from the LAN socket. External alarm connector (DI/DO) See Appendix